Onewheel Pint

"Red 'Dillo incorporates an extremely high ballistic fiber load, our highest-tech suspension, wetting agents, an extremely high load of variable particle size rubber platelets, and significant amounts of corrosion inhibitors to protect your tires and wheels. Suitable for any e-device which operates under 30 MPH where you want maximum protection."

Guppies are Fishbones designed specifically for the smaller form-factor Onewheel Pint.

Rather than buy the Pint Ultracharger, use this adapter to fast charge the Pint in 50 minutes using your XR Home Charger.

Rail images are printed behind .02 clear polycarbonate with adhesive. **Please note any areas of white template that are not covered will be white**

Includes (1) piece of printed and cut to shape grip tape for the Onewheel.

If you bought a Pint and already have the portable DC Charger, this cable will let you use it to charge the Pint.

Images printed directly to the backside of clear polycarbonate plastic with adhesive. Includes top, side and bottom rail pieces, holes for fender screws, and adhesive. Continuous images which wrap from the top rail to the bottom rail.

The PlugBrush for Pint is a clever Onewheel accessory designed by the Engineers that brought you Fishbones.

O-rings for your Onewheel motor axle for replacement during bearing swaps.

Replace your stock rubber valve stem with this 90° nickel plated metal valve stem!

If you bought a Pint and already have the portable DC Charger, this cable will let you use it to charge the Pint.

"Keep Your AirTag® safe and secure inside your Onewheel™ with an Airtag® Snuggie."

"The Onewheel™ Pint Fender with a personality, custom made to your specification"

"Hotrod your ride by cooling down your motor and increasing efficiency!"

“Bead Buddy from Armor-Dilloz - The most incredible rubber safe lubricant you can find - this super thick and slick clear gel will make your tire swapping a breeze!”

"A tough and durable polycarbonate (think bulletproof glass) plate that fits perfectly over your Fangs for Pint or Pint X! At only 7mm thick, it still gives you more clearance over the stock Pint X bumper."

The all new Ignite Fender Insert for your Onewheel is the perfect upgrade to your Flight Fins System.

Say good bye to 2 hour chargers! This 63v 3a charger does the work in 50min!

This Epoxy is the perfect solution for performing preventative maintenance to keep your foot pad sensors from slipping or coming apart from each other while at the same time providing you a 100% waterproofed front foot pad sensor!

Silicone Sealant in 1 oz tubes with precision applicator tip.

These are the replacement battery & controller module vents for the Onewheel GT/XR/Plus/V1 Pint/Pint X. These need to be replaced when waterproofing your modules. 2 or 10 vents is included.

This is the silicone used to water Proof your BMS, power port plug and all the other electrical connector plugs on the controller. 1 bottle will be more than enough to do 10 boards! Includes Re-usable glass syringe for easily applying and extracting excess silicone.

This Tool Kit includes every bit you will need for your Onewheel, including a few extras for various aftermarket accessories. All the bits are made from Hardened Steel!

This is an up to date collection of all the different size Allen Wrenches that are needed to make repairs on your Onewheel.

This is the security torx bit that is needed to open the controller and battery casings on the Onewheel Pint & Pint X. This will not work for the footpads and bumpers.

OneWheel Grip Tape Replacement | Get More Control in 2 Minutes | Precision Die-Cut | Extra Coarse

Life is way too lit to have a boring power button. Spice up your Pint or Pint X with this OSBS Switch Shield.

Got a CBXR or a Quart? Is your head spinning trying to memorize all those voltage conversion chart numbers? We made this "cheat sheet" so you don't have to be like Zach Galifianakis at the Blackjack table.

Add a pop of color to your ride with an aluminum valve cap. These are also equipped with a rubber seal to ensure no air leaks through the valve stem.

Say hello to the OSBS Rail Armor, the ultimate protection for your rails!

Protect your Onewheel Pint or Pint X from debris and water with Flair Fenders, the ultimate fender solution for riders who hate bulky fenders. Made with premium semi-flexible TPU material that is far more durable than inexpensive ABS plastic, Flair Fenders offer superior protection without adding bulk or detracting from the look of your ride.

GT40 is a range booster that aims to extend the range on the onewheel pint and XR, it feeds power from an external battery pack into your main power lead in the front compartment of your board.

Designed for hardcore shredder that takes GT40 to its extreme.

This is the kit we have been waiting so long for! Go out and shred it hard without having to worry about the cable snapping off, this will also protect your GT40's sidewall, along with the improved low profile connector, it will inspire a ton of confidence on the trail.

Replacement cables for your GT40 range extender battery

PMS for your GT40 range extender battery

OverLander Lifters make it easier than ever to execute jumps, spins, and hard-carving turns while riding your OneWheel on trails or pavement. These titanium lifters are our most advanced and durable premium lifter product.

Pads for OverLander Titanium Lifters

The Maghandle Pro elevates your Onewheel carrying experience with premium construction and materials.

Life is hard - sometimes you need Bumpers to take the brunt of it. These high-density Bumpers are ready for anything you throw at them.

Patience may be a virtue, but so is Onewheeling. The Pint Ultracharger can charge your board in under an hour - about half the time of the standard Home Charger so you can have double the fun.

"It just doesn't get better than the Carbon Fiber Pint Fender. Built with visible layers of carbon fiber weave, this fender's strength and steeze are unmatched."

This thang has more kick and tail than a kangaroo! The Pint High Kick footpad features a substantial kicktail for a locked-in stance never before felt on the Pint lineup. This is truly a must-have for Pint and Pint X riders alike. Get yours!

"So beautiful it belongs in an art gallery, the Deep Shack Rack was inspired by the shape of a wave and the flow of riding a Onewheel."

"Stay a-floating with the Tire Inflator. Small enough to fit in a fanny pack, this automatic tire pump is a life-saver. Dial in your exact PSI preference and sit back as your tire is filled jussssst right."

"Say goodbye to dust and debris on your Footpads and stay above the fray with the Onewheel Pint Fender."

"This fully custom, lifesaver of a utility bag is not your average backpack. The Onewheel Backpack is form fitted for your Onewheel and made of coated tarp fabric making it ideal for epic trips, long hauls, and the weekend pilgrimage."

"Make it yours and protect your board in style with the all-new, ultra-fresh Pint Rail Guards."

"Harkening back to its boardsport roots, Pint Surestance Footpads bring a premium wood grain footpad to Pint. "

"Made of a durable and flexible silicone, Pint Charger Plugs offer an extra layer of protection for your board and help prevent dust and debris from entering the charge port. Plus, in a pinch, they can double as board game pieces. Play on!"

You put a lot of work into customizing your Pint to make it looking it's best. Don't let scratched up rails ruin all your hard work!

4 Season Shred x Float Collab | "The most portable and lightweight way to get air in your Onewheel™ tire."

"Use the Black Diamond Grip Tape Roller tool to smooth out your grip and ensure maximum bond to the board."

"Statorade is a line of low viscosity magnetically suspended motor cooling fluid that was jointly developed by Grin Tech, a pioneer in ebike R&D, and Ferrotec, the inventor and undisputed leader of Ferrofluid science since the 1960’s."

"Replacement cable from the wall to charger."

"This Tire Valve Stem is an excellent replacement for the stock Onewheel tire valve stem. Ozone tested and leak tested, these tire valve stems are manufactured from EPDM rubber and equipped with high temperature brass valve cores."

"-●- 𝗪𝗔𝗟𝗟 𝗠𝗢𝗨𝗡𝗧 - A mount enabling you to store and display your Onewheel XR vertically on any wall. Made of powdered coated stainless steel."

Onewheel Slick Tire "10.5×4.50-6" (item #86104)

"They are as strong as steel and half the weight"

"It is CNC machined from solid 6061-T6 aluminum (not cast like the stock part)."

"They are as strong as steel and half the weight"

"Adapter for XR-Charger enables riders to use it with Onewheel Pint. > cuts charging time down to about 50min Only to be used on Onewheel Pint with chargers up to 3.5A"

"Double your Pint’s range with the ultimate “Do It Yourself” battery upgrade. Taking your board to the next level has never been easier with our mod-free housing design. The Quart is the biggest and safest Pint battery on the market!"

"Fast charge on the go Charge over 2.5x faster than the stock charger, works on the Pint AND the Pint X"

"Charge Fast Charge Anywhere. Free yourself from AC Outlets! BoardBank allows you charge anywhere."

"We got you covered! Introducing the first fully collapsible chair compatible with a one-wheeled electric board."

The Onewheel Pint Fender with a personality, custom made to your specification

"Comfortable rubber grip on an anodized aluminum bracket that attaches securely to the side of your Onewheel with velcro (no tools or drilling required) and provides for easier carrying!"

Pint/Pint X-Compatible Version Only. The Homebrew WTF Rails are aluminum rails designed for trail riding that offer increased stability, foot grip, and clearance.